丙烯腈丁二烯苯乙烯ABS,ABS LUVOCOM® 1200-8835是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123,微信:13549213581 QQ:15397858 13549213581 肖生
ABS抗静电性, FDA非特定食品应用
LUVOCOM® 1200-8835
丙烯腈丁二烯苯乙烯
Lehmann & Voss & Co.
Technical Data
产品说明
LUVOCOM® 1200-8835是一种丙烯腈丁二烯苯乙烯(ABS)材料,。 该产品在欧洲有供货,。
LUVOCOM® 1200-8835的主要特性有:
• 抗静电
• 耐化学品
• 水解稳定性
典型应用领域包括:
• 工程/工业配件
• 工具
• 食品接触应用
总体
材料状态 • Preliminary Data
资料 1 • Technical Datasheet
搜索 UL 黄卡 • Lehmann & Voss & Co.
• LUVOCOM®
供货地区 • 欧洲
添加剂 • 抗静电性
特性 • 抗静电性 • 耐化学性良好 • 水解稳定
用途 • 非特定食品应用 • 机器/机械部件
• 工程配件 • 铸模/模具/工具
外观 • 黑色
物理性能 额定值单位制 测试方法
密度 2.65g/cm³ ISO 1183
收缩率 0.20 到 0.30% DIN 16901
吸水率 (23°C, 24 hr) < 0.30%
机械性能 额定值单位制 测试方法
拉伸模量 5000MPa ISO 527-2
拉伸应力 (断裂) 16.0MPa ISO 527-2
拉伸应变 (屈服) 1.1% ISO 527-2
热性能 额定值单位制 测试方法
连续使用温度 60.0°C UL 746B
最高使用温度 - Short Term 80°C
电气性能 额定值单位制 测试方法
表面电阻率 < 1.0E+6ohm IEC 60093
绝缘电阻 < 1.0E+6ohm IEC 60167
注射 额定值单位制
干燥温度 - 热风干燥机 70.0 到 95.0°C
干燥时间 - 热风干燥机 2.0 到 4.0hr
建议的最大水分含量 0.10%
料筒后部温度 220 到 250°C
料筒中部温度 220 到 250°C
料筒前部温度 230 到 260°C
射嘴温度 220 到 250°C
加工(熔体)温度 230 到 260°C
模具温度 40.0 到 80.0°C
LUVOCOM® 1200-8835
丙烯腈丁二烯苯乙烯
Lehmann & Voss & Co.
注射说明
General
• In general LUVOCOM® can be processed on conventional injection moulding machines while observing the usual technical guidelines.
• Any added fibrous materials or fillers may have an abrasive effect. In this case the cylinder and screw should be protected against wear as is usual in the processing of reinforced thermoplastic materials.
• Lengthy dwell times for the melts in the cylinder should be avoided.
• Lower the temperatures during interruptions!
Predrying (optional)
• It is advisable to predry the granulate with a suitable dryer immediately before processing.
• The granulate may absorb moisture from the air.
Delivery Form & Storage
• Unless indicated otherwise, the material is delivered as 3mm-long pellets in sealed bags on pallets.
• Preferably storage should be effected in dry and normally temperatured rooms
Additional Information
• During processing, the moisture content should not exceed 0.1%. Moisture may lead to smearing and in extreme cases to foaming. Usually the material can be processed over a broad temperature range and can thus be adapted to a wide variety of processing conditions. Temperatures >270°C may lead to thermal damage.
• The processing notes provided merely represent a recommendation for general use. Due to the large variety of machines, geometries and volumes of parts, etc., it may be necessary to employ different settings according to the specific application.
• Please contact us for further information.
丙烯腈丁二烯苯乙烯ABS,ABS LUVOCOM® 1200-8835是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123 微信:13549213581 QQ:15397858
13549213581 肖生
|